1/4″ X 2-1/2″ 3FLUTE CORNER RADIUS 0.09 SOLID CARBIDE SQUARE END MILL ALUMINUM

In Stock

SKU: ICB1025

$18.99

1/4″ X 2-1/2″ 3FLUTE CORNER RADIUS 0.09 SOLID CARBIDE SQUARE END MILL ALUMINUM

Use: For universal use in different materials (aluminum alloy steel or same class preferred)

Tool Shank: h5 shank tolerance

Qty
Compare
ORDER NO ICB1025 MATERIAL MIRCO-TUNGSTEN
CUTTING TYPE CONER RADIUS CUTTING DIAMETER 1/4
NUMBER OF FLUTE3 3 FLUTE LENGTH 1/2
FINISHING COATE NO SHANK DIAMETER 1/4
HELIX ANGLE45 45 OVER LENGTH 2-1/2
SHAPE FLAT SIDE MILL CUTTING RADIUS 0.09
BRAND MADE IN TAIWAN SHANK TYPE  ROUND

1/4″ X 2-1/2″ 3FLUTE CORNER RADIUS 0.09 SOLID CARBIDE SQUARE END MILL ALUMINUM

Use: For universal use in different materials (aluminum alloy steel or same class preferred)

Excellent for cutting  prehardened steels, carbon steels, alloy steels of molds and dies, up to HRc55 and machine parts
Tool Shank: h5 shank tolerance
Safe-Lock shank for pull out protection and productivity improvement

Chip breaker & evacuation geometry:
Unequal cutting edge angle and helix for vibration reduced machining
Neck for higher cutting depth
Power Mill end mills are fine balanced
Highest run-out accuracy (max. 5 µm)
Cutting diameter h9

Quality: Consistent high and approved quality 100% cutting output inspection

Available various corner radius end mills, from min. 0.015mm corner radius to the max. 2.0 mm corner radius

 

 

Cutting Condition

DiameterVC(m/min)AP(mm)AE(mm)FEED (mm/min)RPM/MIN
1/81500.150.15200024000
3/162260.170.17250018000
1/43500.20.2280015000
3/84200.250.25300013000
1/24500.30.335008000

 

Tungsten material tungsten  hard alloy (YG)


It has high toughness of flexural strength and good thermal conductivity, but has a poor heat resistance and wear resistance. It is mainly used for processing cast iron and non-ferrous metals. Fine-grained YG cemented carbide  (such as YG3X, YG6X), when the cobalt content is the same, its hardness and wear resistance are higher than  YG3 and YG6, and its strength and toughness are slightly worse. It is suitable for processing hard cast iron and austenitic stainless steel. , Heat-resistant alloy, hard bronze, etc.

Related Products

Order NoD1(MM)L1(mm)D(mm)L(mm)RADIUSTOOTH
ICB10251/41/21/42-1/20.093
ICB10261/41/21/42-1/20.063
ICB10271/41/21/42-1/20.023
ICB10281/41/21/42-1/20.033
ICB10291/41/21/440.0153
ICB10301/41/21/440.033
ICB10311/41/21/440.063
ICB10321/41/21/440.093
ICB10333/41-3/43/460.123
ICB10343/41-3/43/460.153
ICB10353/41-3/43/460.093
ICB10375/81-1/25/860.033
ICB10385/81-1/25/860.063
ICB10395/81-1/25/860.093
ICB10405/81-1/25/860.033
ICB10415/81-1/25/860.123
ICB10425/81-1/25/860.0153
ICB10431/23/41/240.0153
ICB10441/23/41/240.093
ICB10451/23/41/240.063
ICB10461/23/41/240.033
ICB10471/23/41/240.123
ICB10483/83/43/840.033
ICB10493/83/43/840.063
ICB10503/83/43/840.093
ICB10513/83/43/840.123
ICB10523/83/43/840.0153
ICB10533/161/23/1630.0153
ICB10543/161/23/1630.033
ICB10553/161/23/1630.063
ICB10563/161/23/1630.093
ICB10571/81/21/830.0153
ICB10581/81/21/830.033
ICB10591/81/21/830.063
ICB10601/81/21/830.093

 

Ionbond provides thin-film coating services and operates, includes PVD, PACVD, CVD, CVA, and CVI technologies,
including a broad range of DLC coatings. Please contact us for further information.
We look forward to serving you.

Weight 1.5 lbs
Dimensions 15 × 45 × 65 in
Measurement system

Inch (in)

Product Category

Corner Radius End Mill

Sales Unit

single

Number of flutes

3

Cutting Diameter

1/4"

Overall Length

2-1/2"

Top