CAT40 SLIM FIT COLLET CHUCK TOOL HOLDER AND 5pcs SLM COLLET 4-12MM
| MODEL | CAT40 SLM12 4.0 | RUN OUT (TIR) | 0.0002″ | NECK DIAMETER D | 1.4″ |
| HOLDER TYPE | SLIM COLLET CHUCK | CLAMPING RANGE | 3/32-1/2″ | CLAMPING SIZE | SLIM012 |
| SHANK TYPE | CAT40 | DRAWBAR THREAD | 5/8-11″ | T thread | M12 |
| BALANCE | G2.5 25000rpm | Gage Length | 4.0″ | COOLANT | YES |
High-Speed Cutting (G2.5 25000rpm) Balance
High Precision Runout: TIR 5μm or 0.00015
Hardened: surface HRC58 inside is HRC45
Protection: oxide black
5pcs collet include :4,6,8,10,12 mm
Drawings & Parameters Table
| CAT50 TAPER | 8° | TAPER D1 | L1 | FLANGE D |
| DRAWBAR THREAD CAT40 | 5/8-11 UNC | 2.75″ | 6″ | 3.8″ |
Related Tool Holder
| TYPE | L1 | d1 | T | Clamping Range | Weight | ORDER NO |
|---|---|---|---|---|---|---|
| CAT40 SLM06 3.0 | 3 | 0.55 | M6x1.0P | 0.125-0.25 | 1 | IGSL7200 |
| CAT40 SLM06 4.0 | 4 | 0.55 | M6x1.0P | 0.125-0.25 | 1.2 | IGSL7201 |
| CAT40 SLM06 6.0 | 6 | 0.55 | M6x1.0P | 0.125-0.25 | 1.3 | IGSL7202 |
| CAT40 SLM08 4.0 | 4 | 0.787 | M8x1.25P | 0.125-0.3125 | 1.1 | IGSL7203 |
| CAT40 SLM08 6.0 | 6 | 0.787 | M8x1.25P | 0.125-0.3125 | 1.3 | IGSL7204 |
| CAT40 SLM012 2.5 | 2.5 | 1.02 | M10x1.5p | 0.125-0.5 | 1.2 | IGSL7205 |
| CAT40 SLM012 4.0 | 4 | 1.02 | M10x1.5p | 0.125-0.5 | 1.4 | IGSL7206 |
| CAT40 SLM012 6.0 | 6 | 1.02 | M10x1.5p | 0.125-0.5 | 1.6 | IGSL7207 |
| CAT40 SLM020 3.0 | 3 | 1.37 | M12x1.75 | 0.125-0.75 | 1.45 | IGSL7208 |
| CAT40 SLM020 5.0 | 5 | 1.37 | M12x1.75 | 0.125-0.75 | 1.5 | IGSL7209 |
| CAT40 SLM020 6.0 | 6 | 1.37 | M12x1.75 | 0.125-0.75 | 1.6 | IGSL7210 |