SK40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL

In Stock

SKU: SK40OMP60

$129.99

SK40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL

Working for all SK40 spindle machine

All critical surface  by grind round

Qty
Compare

SK40 TOOL HOLDER OMP60 PROBE HOLDER GAGE CALIBRATION TOOL

MODEL SK40 PROBE HOLDER  NOSE DIAMETER 1.73″
HOLDER TYPE  PROBE HOLDER ARBOR DIAMETER 0.790″ x 1.0″ deep
FLANGE DIAMETER 2.50″ DRAWBAR THREAD M16x 2.0
SET SCREW M8x1.25 (2pcs)  included Gage Length 1.30″

 

 

 

Similar probe tool holder available

ModelMounting HoleGauge lengthSet screwRear ThreadOrder No
BT30 -OMP4011.20/(0.44")1.0" (20MM)M4x0.7M12 x 1.75"IGSB-9016
BBT30 -OMP4011.20/(0.44")1.0" (20MM)M4x0.7M12 x 1.75"IGSB-9017
BT40 -OMP4011.20/(0.44")1.30" (30MM)M4x0.7M16 x 2.0"IGSB-9018
BB40-OMP4011.20/(0.44")1.30" (30MM)M4x0.7M16 x 2.0"IGSB-9019
BT40 -OMP6020.00/(0.790")1.35" (35mm)M8x1.25M16 x 2.0"IGSB-9020
BB40-OMP6020.00/(0.790")1.35" (35mm)M8x1.25M16 x 2.0"IGSB-9021
CAT40-OMP4011.20/(0.44")1.30" (30MM)M4x0.75/8-11"IGSB-9022
CAT40-OMP6020.00( 0.790")1.35" (35mm)M8x1.255/8-11"IGSB-9023
Dual Contact CAT40 OMP4011.20/(0.44")1.30" (30MM)M4x0.75/8-11"IGSB-9024
Dual Contact CAT40 OMP6020.00( 0.790")1.35" (35mm)M8x1.255/8-11"IGSB-9025
ISO20 OMP4011.20/(0.44")1.30" (30MM)M4x0.7M8x1.0IGSB-9026
SK40 -OMP4011.20/(0.44")1.30" (30MM)M4x0.7M16 x 2.0"IGSB-9027
SSK40-OMP6020.00/(0.44")1.30" (30MM)M4x0.7M16 x 2.0"IGSB-9028

 

Drawings & Parameters Table

                  

CAT40 TAPER 8° TAPER D1 L1 FLANGE D
DRAWBAR THREAD CAT40 5/8-11″  UNC 1.75″ 2.69″ 2.50″

 Material Application

a. Quenched and tempered structural steel: The carbon content of this type of steel is generally about 0.25% to 0.55%. For structural parts of a given cross-sectional size, when quenched and tempered along the cross-section during quenching and tempering (quenching and tempering), the mechanics The performance is good. If the hardening is not penetrated and free ferrite appears in the microstructure, the toughness decreases. For steels with a tendency to temper brittleness, such as manganese steel, chromium steel, nickel-chromium steel, etc., they should be cooled quickly after tempering. The quenching critical diameter of this type of steel increases with the increase in grain size and alloying element content. For example, 40Cr and 35SiMn steel are about 30-40mm, and 40CrNiMo and 30CrNi2MoV steel is about 60-100mm, which is often used in manufacturing Structural parts such as shafts and connecting rods with large loads.

b. Surface hardened structural steel: used to manufacture hard and wear-resistant surface parts and flexible parts, such as gears and shafts. In order to increase the toughness of the core of the part, the carbon content in the steel should be low, generally 0.12 to 0.25%, and there is also an appropriate amount of alloy elements to ensure proper hardenability. Nitrided steel also needs to add alloy elements (such as Al, Cr, Mo, etc.) that are easy to form nitrides. Carburized or carbonitrided steel, after carburizing or carbonitriding at 850~950℃, quenched and used under low-temperature tempering (about 200℃). The nitrided steel is directly treated by nitriding (480~580℃), and it is no longer quenched and tempered.

Weight 1.5 lbs
Dimensions 15 × 45 × 65 in
Measurement system

Inch (in)

Product Category

Gage Calibration Tool

Shank Type

SK40

Top